Plastic crusher as the name suggests is broken plastic material crusher. In the injection molding machine or granulator production of raw materials at the same time, resulting in bad goods and outlet material, can be timely into the machine side plastic crusher, after crushing OK, and keep the crushed clean, dry, in the "rain ratio valve" The proportion of the case, the raw material and outlet crushed mixed, forming, manufacturing good, recycling. Plastic crusher and other auxiliary (dryer, dehumidifier, chiller, mold temperature machine, etc.) with the formation of the "crushing ratio of mixed recovery system" is the advantage of water pollution is not material, resulting in plastic physical properties - strength , The density, the color and gloss from damage, Plastic Shredder it can improve the quality of the product; its benefits include cost and material savings, process management automation improvements, Plastic Shredder quasi-unattended workshop action, enhance competitiveness and environmentally friendly manufacturing activities.
Maintenance and maintenance of plastic crusher
1, the plastic crusher should be placed ventilation position to ensure that the motor heat dissipation, to extend its life.
2, should be regularly filling the bearing lubricating oil to ensure the lubrication between the bearings.
3, regularly check the tool screw, the new plastic crusher use 1 hour later, Plastic Shredder with a tool to tighten the knife, set the screw, to strengthen the blade and the fixed between the knife.
4, in order to ensure the sharpness of the cutter incision, should always check the tool to ensure its sharpness, reduce the blade blunt caused by other parts of the unnecessary damage.
5, the replacement of the tool, the knife and the knife between the gap: 20HP crusher 0.8MM better, 20HP below the crusher 0.5MM is better. Recycled material is thinner, the gap can be properly adjusted.
6, before the second start, you should first clear the remaining pieces of the machine room to reduce the starting resistance should be regularly open the inertial cover and pulley cover, Plastic Shredder remove the flange below the gray mouth, because the plastic crusher room discharge powder into Shaft bearings.
7, the machine should be kept well grounded.
8, regular inspection of plastic crusher belt is loose, timely tightening.
Plastic crusher crushing ratio of large, uniform product size
Plastic crusher gasket discharge port adjustment device, Plastic Shredder reliable and convenient, large adjustment range, increasing the flexibility of the equipment;
Plastic crusher structure is simple, reliable, low operating costs;
1, suitable for crushing all kinds of small and medium-sized plastic pipe, such as PE, PVC pipe, silicon tube and other pipe crushing recovery.
2, for the tube material crushing and unique design of the tube-type feed port, easy to strip into the pulverized, improve work efficiency. Optional suction fan, storage bucket composition of the pipe crushing and recovery system can be more fully play the recovery efficiency.
3, the use of sealed bearings, the bearing rotation for a long time to maintain good; knife design is reasonable, the product into a uniform; knife seat heat shrink treatment, shape design nice.